AUTONET TV

Deep Clean Your Fuel System at Gilmore's Auto Service

Having trouble with your fuel system? Bring your vehicle into Gilmore's Auto Service for a check up.

In today's Gilmore's Auto Service auto post, we're talking about fuel system cleaning. The first thing to know is how important it is to have a clean fuel system. Walnut Creek residents need fuel to go, and the cleaner the fuel system, the more efficiently the fuel will burn. That means more power and better mileage .

A clean fuel system saves money for Walnut Creek drivers at CA gas stations. We guess you could say it all starts and ends at the pump. One of the most important things Walnut Creek residents can do to keep their vehicle fuel system clean is to buy good quality gas. Major brands have detergents that keep gum and varnish from rapidly building up in the fuel system.

So buying cheaper gas in CA can actually be more expensive for Walnut Creek drivers in the long run. Now, most cars on CA roads are more than five or six years old. That means they've had time for some dirt and rust to start accumulating in the fuel tank. This junk needs to be filtered out of the fuel before it hits your vehicle engine. That's the fuel filter's job.

When the fuel filter is clogged, the dirty fuel will bypass the filter and go on up to the engine where it can clog fuel injectors and get into the cylinders. So Walnut Creek residents should have their fuel filter changed when recommended. Check your owner's manual or ask your friendly and knowledgeable Gilmore's Auto Service service advisor if your fuel filter is due for replacement.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

When You Hear the Crash in Walnut Creek: What to Do After an Accident

Motorists in North America drive about 3 trillion miles/4.8 trillion kilometers every year. There are over 250+ million licensed drivers, and approximately 6.2 million accidents happen every year. Unfortunately, if we're going to drive vehicles, there are going to be accidents. Knowing what to do in case of an accident can help reduce the stress and cost of the situation. It can also protect you from false claims, incorrect judgments and unjust liabilities.

Never leave the scene of an accident. This is a crime, even if the accident is not your fault. If you leave the scene, it is referred to as a “hit-and-run,” and the fines are steep in CA. You can even lose your driver's license or spend some time in jail. If someone has been injured in the accident, most laws require you to help them. You must call for help. If you can, you must also render first aid.

Call 9-1-1 or get someone else to call 9-1-1 as soon as possible. Tell the operator if there are injuries or any circumstances that require fire services, such as leaking gas, broken utility lines or, of course, flames. Put out flares, turn on your flashers or lift your hood to warn other Walnut Creek motorists that there's been an accident.

File a police report. This can seem like a hassle when there are no injuries and only minor damage to vehicles. But you'd be surprised at the lawsuits and false claims that can arise from fender benders. You want a police report to protect yourself.

Don't talk about the accident with anyone except the police. After an accident, adrenaline is pumping and emotions are running high, and our first reaction is often to relive and recount our experience. Don't. Again, people can and will use your words against you, and in a highly emotional state, you may not say exactly what you mean. Entire court cases have hinged on the meaning of one misplaced word. Talk to the police. Don't admit guilt or fault, not to the police or to anyone else. People often feel guilt after an accident, but later, when details are analyzed, it turns out not to be their fault. Don't say, “I'm sorry,” but rather, “Can I help? What can I do?” Sympathy has often been misconstrued as an admission of fault. On paper, your words will sound more sterile than at the accident, and they can be used against you.

Collect contact information from everyone involved in the accident. Get the officer's name and badge number. Get the other driver's name, address, phone number, date of birth, driver's license number and expiration and insurance information. Get a description of the other vehicle as well as its license plate number and vehicle identification number (VIN). Most insurance companies don't keep records of license plate numbers, so the VIN is the best identifier you have of another vehicle.

This is going to be too much to remember once you're in an accident. So write down or make a note on your phone with the information you need.

Ask witnesses to wait for the police to arrive. If they can't, then get their contact information. Ask them to jot down what they saw. If witnesses refuse to give you their names, write down their license plate numbers. That way the police can find them if necessary.

After the accident, call your insurance company. Also, if you have or think you might have an injury that did not require immediate care at the accident, contact your physician right away.

There's a lot Walnut Creek drivers can do to prevent accidents. Defensive driving. Good car care and preventive maintenance. But if an accident does happen in the Walnut Creek area, we should be prepared to handle it well. It will ease the stress of the situation and protect us from potential legal and financial harm. Be prepared. It's good auto advice in every situation. Ask our pros at Gilmore's Auto Service for more safe driving tips the next time you visit.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Timing Belt Replacement in Walnut Creek

Today we want to talk to Walnut Creek drivers about timing belts. They're something that many drivers don't know much about and yet your vehicle won't run if it's broken – and it could cause many thousands of dollars damage if it does break. A broken timing belt is usually a tale of woe. Even though timing belt replacement is scheduled in the owner's manual, it's not the kind of thing that most Walnut Creek area auto owners remember because it's not well understood.

Let's review what a timing belt does. As most know, the engine's power is generated in the cylinders. A piston rides up and down in the cylinder. During the first down stroke, an intake valve at the top of the cylinder opens and air and fuel is drawn into the cylinder. Then the piston returns to the top, compressing the fuel and air mix. At the top, the spark plug fires, igniting the fuel, pushing the piston down in the power stroke. As the piston once again returns up in the final stroke of the cycle, an exhaust valve opens at the top of the cylinder and the exhaust is pushed out. The timing belt is what coordinates the opening and closing of the intake and exhaust valves. It's called a timing belt because the valves have to open and close at just the right time.

Now, not all vehicles have timing belts. Some have timing chains. Like the name implies, they use a chain rather than a belt to perform the function. It used to be that most engines used timing chains, which are extremely durable. The leading vehicle manufactures started using belts rather than chains to save money in the manufacturing process. So now Walnut Creek drivers and their advisors at Gilmore's Auto Service are left with a component that can break. They sort of shifted the problem to us. There are two broad categories of engine design: interference and non-interference. If the timing belt on a non-interference engine breaks, the engine simply stops running. That could be very dangerous for drivers depending on where they are at the time, but it causes no internal engine damage.

Interference vehicle engines, on the other hand, will get real messed up when the timing belt breaks, because the valves will actually fall down into the path of the pistons. Things get chewed up when that happens and it'll cost a chunk of change to repair the vehicle engine.

So, what are the warning signs? Unfortunately, there really aren't any. There aren't tell-tale sounds. In some vehicles, a technician from Gilmore's Auto Service may be able to see part of the belt for a visual inspection, but many have a cover that's in the way. The reality is that if the belt slips even one notch, it might as well be broken for all the damage it'll cause. There's no middle ground.

So how can we avoid these problems? Simply replace the timing belt when your owner's manual calls for it. It can be 60,000 miles/97,000 km; it might be 90,000 or 100,000 miles/145,000 or 160,000 km. The point is, if you have 60,000 or more miles (97,000 or more km), ask your Gilmore's Auto Service service advisor right away if your vehicle requires a timing belt replacement.

Contact Gilmore's Auto Service to learn more about your car's timing belt
You can find us at:

2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Sometimes Walnut Creek drivers can go quite a while without a failure, but we've seen them happen within a couple of oil changes of being due. It's not worth the risk.

What does it cost to replace a timing belt in Walnut Creek? Well, that really depends on what kind of car you have. I can tell you that it's usually not very easy to get to the timing belt – you often have to remove some accessories to get at it. It isn't a cheap procedure, but it's a fraction of what it could cost to repair the damage caused by a failure.

At Gilmore's Auto Service in Walnut Creek, we're all about trying to prevent repairs, keeping you and your passengers safe and increasing your driving enjoyment. 

Gilmore's Auto Service Guide to Using the Correct Fluids in Your Vehicle

Today's Gilmore's Auto Service post focuses on using coolant. If you pour in the wrong kind, it won't protect the cooling system and may even void the warranty. Check your vehicle owner's manual. Of course, your Gilmore's Auto Service service advisor will know the proper coolant for your vehicle.

Brake fluid is confusing for some Walnut Creek drivers. Back when we opened Gilmore's Auto Service, most vehicles used Dot 3 brake fluid. Now we have Dot 4 and Dot 5. Some Walnut Creek residents mistakenly think the higher numbers are an upgrade. You know, if 3 is good then 4 must be better. That's not how it works. They are different formulations to meet the demands of differences in brake systems. Only one of them is designed for your vehicle.

Ditto for transmission fluid. For decades there were two basic types of tranny fluid used at Gilmore's Auto Service: friction modified or not. With the tremendous engineering advances in vehicle automatic transmissions, there have been several new types of fluids developed to protect and lubricate them.

Nowhere are the advances in automotive fluids more evident to Gilmore's Auto Service professionals than in motor oil. Many new weights and formulations have been created to meet the demands of today's high-tech vehicle engine design. Modern engines have more parts and much tighter tolerances.

That's where the new grades of engine oil come in. They have to be formulated to lubricate, protect and clean all of those vehicle engine parts, big and little. The oil has to be thin enough to get into little passages, yet resistant to vaporization.

At Gilmore's Auto Service in Walnut Creek, we believe that in some ways modern automotive fluids are just as impressive as the new engines. Because weights of oil and types of coolant and transmission fluid are so carefully matched to the vehicle, make sure you always use the proper fluid if you are topping off at home.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net