AUTONET TV

A Clean Start (Battery Cleaning)

Your vehicle is loaded with electrical devices. Computerized components are everywhere, so good electrical connections are important.  Those begin with your vehicle's battery, so it's important that its connections are in top shape.

Ever had a flashlight that didn't work, took out the old batteries to replace them and noticed the old batteries were all corroded? The same thing can happen to your vehicle's battery. 

The battery type used in most vehicles is a lead-acid, which can be very corrosive.  Corrosion can build up around your battery's terminals that can prevent the electrical connection from being as solid as it needs to be.  You may have even seen discoloration around your battery's terminals if you look under the hood, a sign of corrosion.

Or you might notice visible signs of fraying or loose battery cables. All of your vehicle's components are affected by vibrations from the engine and road surface imperfections, and the battery cables take a lot of jostling every time you drive.  Frayed cables won't conduct as much electricity as intact ones.  Plus, there's the possibility that a frayed cable may touch a piece of metal in the engine compartment that can cause shorts and other problems.

There are some signs to watch out for that might tell you if your battery terminals are corroded or your cables aren't making good contact with them.  You might find your vehicle isn't starting as easily as it used to. You also might see the battery warning light illuminated on your dash. That light looks like a rectangle with a "-" and "+" sign inside.

Our technicians can make sure your battery and cables are at optimal operating capability with regular service and cleaning.  A technician will clean the terminals and portions of the cables that are connected to them.  They may also add an anti-corrosion agent to the cables/terminals. Nothing like giving your vehicle a clean start!

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Wash Me, Wash Me Right (How to Wash a Vehicle)

Most would agree they'd rather drive around in a clean, shiny vehicle than one coated with a layer of dirt.  When warmer weather comes around, some of us are bound and determined to wash our own vehicles.  And to protect the paint and its luster, there are a few things to keep in mind when you get out the bucket and soap.

• Cool body.  It's not a good idea to wash a vehicle when the body is hot.  If it's been sitting out in the sun or you've been riding around on a sunny day, make sure you cool your vehicle off by either moving it to the shade or wetting it down with cool water. The problem with washing a hot vehicle is that it's going to dry so fast, minerals in the water can form hard-to-remove spots on the paint.  And some of those can be really difficult to get out.  Best to avoid it.
• Slippery when wet.  Make sure you wet your vehicle down thoroughly before you get the washing mitt out.  Experts keep a couple of buckets of soapy water on hand, and they use soap especially engineered to remove dirt from a vehicle without stripping off the wax that might be on it. 
• The washing mitt.  Experts say to use a mitt with hundreds of moisture-absorbing strands on it.  Start washing at the top and move down.  If you keep dipping the mitt in the buckets frequently, a minimal amount of dirt will stick to it and that will prevent scratching the paint. 
• Wheels last.  Wait until you've finished washing the body before washing the wheels.  Some detailers prefer special wheel-washing tools or brushes. 
• Rinse it well.  Hose the vehicle off thoroughly to get all the soap off, then dry immediately.  Some people swear by a chamois, others like cloth better.  Cotton or microfiber towels will do.  

The next time you have your vehicle in for maintenance, you might ask your service advisor for recommendations on vehicle washing accessories.  They are usually up on the brands that produce the best results.  You may not be a detailing pro, but there's no reason your vehicle can't look like you are.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Go With the Flow (MAF Sensor Replacement)

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short.

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gasoline for the amount of air) or too lean (not enough gasoline for the amount of air).

In this driver's case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, it stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

The Little Valve that Could (PCV Valve Replacement)

It's easy to get letters like PVC and PCV mixed up.  PVC is a plastic that's used in a lot of things, especially plumbing pipes.  And PCV is a valve that helps your engine burn off excess fumes rather than having them pollute our atmosphere. 

PCV stands for positive crankcase ventilation.  When your engine ignites gasoline in the cylinders, some of the gases produced make their way into the crankcase, where oil is held to lubricate the engine.  In earlier days, those gases would be vented out through a hose and go directly into the air.  It was a waste of gasoline (since about three-fourths of the gases were unburned fuel) and a nasty source of pollution.

So engineers devised a one-way valve that directed those gases back into the engine's air intake system to be burned again.  After a while, the PCV valve can get clogged up with gummy oil.  Not only does that reduce the recirculation of the gases, but it can also cause pressure in the crankcase to increase and possibly lead to an oil leak.

Signs your PCV valve has failed are oil leaks around the engine compartment or under your vehicle and poor engine performance. Your fuel economy will get worse. If you notice those signs, we can check your PCV valve. 

At the same time a technician inspects the PCV valve, they'll also check the vacuum hose that runs back to the air intake.  Plus, they'll make sure the vehicle doesn't have any other engine problems that might be contributing to your issues. 

Many technicians recommend replacing your PCV valve with each major tune-up, so you get ahead of any problems before they develop.  Now that you're an expert on PCV, it may be time to check out those PVC pipes in your bathroom!

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net