AUTONET TV

Need a New Battery? Call Gilmore's Auto Service Today

Hello Walnut Creek drivers! Need a new battery? There is a good chance that you do – 70% of batteries need to be replaced within four years. As your battery discharges and then recharges as you drive around Walnut Creek, bits of the surface of the battery plates disintegrate. As this process continues over a few years, the alternator has to work harder to supplement the battery charge. Over time, enough of the battery is damaged that it can no longer hold a charge and it needs to be replaced. This also speeds up wear on the alternator.

Your Gilmore's Auto Service service advisor can help you determine the right vehicle replacement battery for the way you drive around Walnut Creek, as well as the CA climate and durability needs.

Contact Gilmore's Auto Service for information on battery replacement.

Give us a call.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

How to Radiate Cool (Radiator Care)

There's nothing that radiates cool like a vehicle radiator that's helping to keep your engine running at the proper temperature.  You don't have to baby it, but you can't simply ignore it, either. 

Let's take a quick dive under the hood to let you know what the radiator is doing.  It takes the heat your engine produces and moves that heat outside.  It's not an easy job and heat is an engine's number one enemy.  Now that you're thinking how nice you want to be to your radiator, we have a couple of ideas how you can take care of it.

The easiest thing is to pay attention to your vehicle's temperature gauge. If it gets in the "too hot" or "not hot enough" range, have it checked out soon.  Make sure your coolant is kept at the correct level and if you see a trend that you have to add coolant more than a couple of times a year, you might have a leak.

Even if there are no obvious problems, every couple of years or so, consider taking your vehicle in for radiator maintenance.  A technician can run a pressure check for leaks and ensure that the thermostat and radiator cap are working correctly.  The technician will check that fans are running like they should so they can move air over the radiator and heat away from the coolant inside.

Ask your service advisor when you should have your radiator flushed and coolant replaced according to the manufacturer's recommended intervals.  In addition to cooling, coolant has corrosion inhibitors which stop working after a while.  Without those corrosion inhibitors, the inside of your radiator can literally start rotting away.  Keep in mind that the coolant level must be kept at manufacturer's specifications since if those corrosion-preventing chemicals aren't touching the metal, they're not preventing corrosion. 

Different vehicles use different coolants, so your service facility will make sure yours is getting the correct one.  Keep your coolant system happy and one day, maybe you can order up a custom license plate, "RAY-D-8."

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Weather Station on Wheels (Vehicle Sensor Maintenance)

You probably never thought about it, but your vehicle is like a rolling weather station.  It can check the outside temperature, let you know when the roads are slippery and help you deal with rain. And how it does all those things is pretty cool.

First, just like any weather station, a vehicle has sensors that measure the driving and weather conditions you find yourself in.  Some of those sensors can control computerized systems in your vehicle to react to the weather.  It depends on whether you have a 2-wheel, 4-wheel or all-wheel drive vehicle how those sensors will respond.

Let's start with temperature.  Most vehicles now have a thermometer that measures the temperature outside.  It's usually in the front, and likely will tell you on the instrument panel what the outside temperature measures.  But a temperature sensor will also tell your vehicle's computers to turn on or off certain systems like the heating or air conditioning.  If your ambient temperature sensor isn't working right, some symptoms are a malfunctioning automatic A/C or a temperature display that is way different than the app on your phone says it should be.

Your vehicle will also have sensors that measure your speed at each wheel.  They work with an onboard computer to measure slippage in any of the wheels so traction control and antilock brakes work correctly in case of slick roads.

Your vehicle can measure something called longitudinal and latitudinal acceleration, and it uses a yaw sensor to do it.  That helps it determine if you might be in an oversteering or understeering situation.  It's important because it works with your vehicle's brakes to apply stopping power to keep you in control.

A steering wheel sensor tells the vehicle's computers what the driver is doing with the wheel.  It also can work with those wheel sensors to measure how slippery the roads are, whether it be due to a wet (rain) or granular (gravel or sand) surface.  By sending different torque or braking to each wheel, it helps the driver maintain control.

More and more vehicles now have a rain sensor that can turn on the wipers automatically when they measure precipitation on the windshield.

So, you're driving your own weather station, and making sure all this data is coming in properly depends on how each component is working.  Regular service and maintenance on these systems is important to make sure they can do their job. Your rolling weather station can't predict the weather, but it can sure help you deal with it, so help it do its job right.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Fuel Injectors

The last new American vehicles sold in Walnut Creek with a carburetor rolled out of the CA dealerships in 1990. Since then, all new vehicles here in Walnut Creek, and nationally, have had fuel injectors. In very simple terms, a fuel injector is a valve that squirts fuel into your engine. Your engine control computer tells the fuel injector how much gas to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute. Fuel injectors deliver fuel far more precisely than carburetors. That translates into better fuel economy and more power for Walnut Creek drivers. Virtually all fuel injectors for gas engines are known as port fuel injectors because they deliver the fuel to a port just outside the cylinder. Port fuel injectors operate at about 40 to 80 pounds per square inch of pressure.

A few vehicle manufacturers have introduced gas direct injection systems on some engines recently. These systems inject the gas directly into the cylinders under very high pressure - hundreds of times the pressure of port injection systems. Although more complicated, direct injection technology promises greater power with improved fuel economy, so CA drivers can expect to see more of it in the future.

As Walnut Creek residents can see, the level of precision required of fuel injectors is very high. It's important that they operate properly in order for your vehicle to run right.

High temperatures under your hood and variations in Walnut Creek gas quality cause fuel injectors to become fouled with wax, dirt and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure. The design of each engine requires a specific spray pattern from the fuel injector that might be altered when the injector is dirty. When injectors are dirty, the fuel doesn't burn as efficiently, resulting in poor fuel economy and loss of power. So it is important to keep your vehicle fuel injectors clean.

Skilled service technicians at Gilmore's Auto Service in Walnut Creek can perform a fuel system service for you. That is a fuel system service - not just fuel injector cleaning. That is because the fuel has a lot of ways to become dirty or contaminated between the Walnut Creek gas pump and your fuel injectors. A fuel system service at Gilmore's Auto Service starts with a fuel filter replacement. This filter cleans the gas as it leaves the tank. The various parts of the fuel intake system need to be cleaned from time to time to remove harmful gum deposits and varnish. Finally, the fuel injectors are cleaned so that they operate properly for you and deliver the right amount of fuel at the right time.

Our pros at Gilmore's Auto Service use a process for cleaning your vehicle fuel system that includes state-of-the-art cleaning chemicals as well as some old fashioned scrubbing. Proper maintenance of your fuel system means that you will enjoy strong performance and prevent repairs down the road.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net