AUTONET TV

Buying the Right Tires and Wheels in Walnut Creek, CA

Everyone in Walnut Creek, CA eventually replaces their tires, whether it's because they're worn out or they're just looking for something different. There are so many great tire choices in Walnut Creek, it can be difficult to sort them out. Let's group the broad spectrum into several categories that will help in the selection process.

One category is often referred to as "summer tires". Summer tires are designed to be driven on the road when temperatures are generally above 45 degrees F (7 degrees C). Their tread design is optimized for traction on dry roads around CA and they're also able to effectively displace water on rainy roads.

So if you live where its summer all year round, these tires will work well for you. If you like maximum performance in warm weather, but still live where it gets cold and snowy, you'll want to change your summer tires for winter tires as the weather starts to change.

There's a range of tires within the winter tire category. If you live where there's a lot of snow and ice, look for the mountain and snowflake icon that signifies a severe snow rating. If you have milder winters and still want a performance component, they make a winter tire for you as well.

For many people, an all-season tire is the answer. You will give up some of the performance at the extreme ends of the summer tire/ winter tire spectrum, but you will find a long wearing tire that gives both good highway performance and winter traction on our Walnut Creek, CA, roads.

Within the all-season category, there are many choices that your tire advisor at Gilmore's Auto Service can help you evaluate.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Transmission Service at Gilmore's Auto Service in Walnut Creek

Let's talk about transmission service. It can be easy for Walnut Creek drivers to forget about getting their transmission serviced because it doesn't need it very often. It's easier for people in CA to remember to change the engine oil - you know, every 3,000 miles or 5,000 kilometers. But proper transmission servicing keeps your vehicle running smoothly and helps you avoid repairs down the road.

The transmission undergoes a lot of stress. The grit you can see in used transmission fluid is actually bits of metal that wear off the gears in the transmission. In addition to that, the transmission operates at very high temperatures. Usually, it's much higher than engine temperatures. Those high temperatures eventually cause the transmission fluid to start to break down and lose efficiency.

As the fluid gets older, it gets gritty and doesn't lubricate and cool the vehicle transmission as well - leading to even more wear. The fluid can actually get sludgy and plug up the maze of fluid passages inside the transmission. At best, your transmission won't operate smoothly. At worst, it could lead to damage.

When your transmission is running properly, it transfers more power from your engine to the drive wheels and improves fuel economy. That's why it is recommended to change your transmission fluid at regular intervals. Your owner's manual has a schedule for transmission service and, of course, your service advisor at Gilmore's Auto Service can tell you what is recommended.

Hot and dusty Walnut Creek area conditions, towing, hauling, stop-and-go driving and jackrabbit starts all begin to increase the load on the transmission and its internal temperature. That means Walnut Creek vehicles with these types of transmission requirements need to change the fluid more often. A good rule of thumb is every 35,000 miles, 55,000 kilometers or two years. If your owner’s manual suggests more frequent intervals or if you're driving under severe service conditions around the Walnut Creek area, you will need to change it more often.

Most Walnut Creek auto service centers (including Gilmore's Auto Service) have the ability to perform a transmission service while you wait and the cost is quite reasonable. It's downright cheap when you think about how much a major transmission repair can cost! Our pros at Gilmore's Auto Service will know the right type of transmission fluid to use. If it's getting to be time to have your transmission serviced, do your vehicle a favor and have it done.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Automotive Tips from Gilmore's Auto Service: Air Conditioning ? Common Problem

Your auto air conditioning system cools and conditions the air in your passenger compartment when you are driving around Walnut Creek. It also removes moisture from the air to keep your windows from fogging up.

A common A/C problem for Walnut Creek drivers that visit Gilmore's Auto Service is contaminated refrigerant (the gas that cools the air). The inside of the A/C hoses deteriorates over time and tiny fragments of rubber clog passages. This makes the system less efficient and overworks various components.

Leaks can develop at seals and gaskets and may reduce the amount of refrigerant, causing the system to work too hard to compensate. Dirty components can have the same consequences.

Ask your Gilmore's Auto Service service advisor for an air conditioning system inspection to make sure everything is up to spec.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Objects in the Mirror (Rearview Mirror Safety and Maintenance)

You may remember a song that went, "Objects in the rearview mirror may appear closer than they are." While that was a song about life's lessons, there are a few things we should all know about how important rearview mirrors are to safe driving.

While new electronic devices are helping drivers be aware of surrounding traffic in high-tech ways, the good old rearview mirror is still a dependable way of letting you know what's around you.  There are usually 3 on each vehicle, 1 attached to the windshield inside and 2 attached outside on each of the front doors.

It's important that they be adjusted properly before you start driving (not while you're driving). Experts say the windshield rearview mirror should cover the area behind the vehicle while the outside mirrors should not simply duplicate that view but extend it to the sides, where blind spots normally are.

Your rearview mirrors must be able to hold the positions they're adjusted in; it there's play in them or they move around, you'll never be sure they're pointed in the direction that will let you see where traffic is.  The one on the windshield must be firmly attached.  If it won't stay where you want it, head to your service facility where they can tighten it or replace any parts necessary to let the mirror maintain its aim. If it has fallen off the windshield completely, a technician can reattach it with the proper adhesives or fasteners.  There may be electronics that need to be properly connected as well.

The outside mirrors cover your blind spots and they must be able to hold their adjustments, too.  Many adjust electronically; switches and motors can fail, electrical connections can detach or become corroded and the reflective glass can crack, discolor or develop a hazy fog.  A technician can diagnose and repair those problems and recommend any replacement parts you might need.  Mirrors that are adjusted manually also should be restored to proper working order in order for you to maintain this important rear visibility.

Drivers don't think about their rearview mirrors all that much.  On reflection, don't they deserve respect and care for the important job they do?

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Such a Little Part (Climate Control Resistor)

You expect your heater/air conditioner to work like it should.  You have a control for temperature and one for fan speed.  You even have a control for what vents the air comes out of. 

Don't be surprised one day if your blower fan develops a mind of its own and starts going crazy.  Most of the time, you may find that it starts blowing at full speed, and nothing you do to try to control it does any good.  This is what may be happening.

Your blower motor has an electronic component called a resistor.  It does what its name says; it offers resistance.  When you want the fan to run more slowly, you turn the fan speed down.  That resistor accomplishes that by turning its resistance up.  When the resistor fails, the power has nothing to slow it and the fan speeds up. 

It's a small part and can fail due to age or corrosion.  It's usually not an expensive part, either, but it's often found in a location that's not that easy for the technician to get to.  That means labor costs will vary depending on the design of your vehicle. 

Occasionally, a faulty resistor can cause the blower motor not to work at all or only partially come on.  But other things can cause that as well, such as a faulty fan switch or vent control. 

This is where a technician's training comes in.  Special equipment can track down precisely where the issue is so you can be assured the correct part is being replaced.

It's just not pleasant when the blower motor isn't following orders.  Have your service facility check it out so you can be the blower's boss, like it should be. 

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net